| Hal Albach 06/13/09 10:27 Read: 260 times Seminole, Florida USA |
#166054 - Printer settings Responding to: Giang Ho's previous message |
Have you tried the self-test function of the printer to at least ensure the printer can print on its own and verified that the serial settings in Hyperterm match the settings printed out?
The User manual states that when the printer is powered up without the special serial cable it will default to Irda, so make sure the serial cable is properly seated in the printer before turning it on. Does your PC have an actual serial port or are you using a USB to Serial adapter? Many of the adapters are very problematic with anything more than simple RS232 comms, especially if you are using Vista. Hal |
| Topic | Author | Date |
| CMP-10 thermal printer & 8051 | Giang Ho | 06/13/09 08:47 |
| Printer settings | Hal Albach | 06/13/09 10:27 |
| Some hints/advice.. | Valentin Angelovski | 06/13/09 11:11 |
| I sent commands like "BEL", or "ESC RS" | Andy Neil | 06/13/09 11:14 |
| ASCII table | Per Westermark | 06/13/09 13:58 |
| HyperTerminal & ASCII code | Giang Ho | 06/13/09 18:56 |
| Would it be realistic.... | Michael Karas | 06/13/09 21:45 |
| Not text, | Per Westermark | 06/14/09 01:54 |
| Not text, | Giang Ho | 06/14/09 03:08 |
| Spend more time with the ASCII table. | Per Westermark | 06/14/09 03:35 |
| Still fail to test the printer | Giang Ho | 06/18/09 07:37 |
| The printer is working | Giang Ho | 06/18/09 09:04 |
| ASCII char on HyperTerminal | Mahesh Joshi | 06/20/09 07:11 |
| Re: ASCII char on HyperTerminal | Giang Ho | 06/21/09 09:16 |
| ASCII char on HyperTerminal | Mahesh Joshi | 06/20/09 07:11 |
| Is that guaranteed? | Andy Neil | 06/20/09 13:15 |
| I use it that way | Mahesh Joshi | 06/22/09 01:28 |
| XOn/XOff set on MCU side | Giang Ho | 06/18/09 22:08 |
| You have to do it yourself | Andy Neil | 06/19/09 01:36 |
| Re:You have to do it yourself | Giang Ho | 06/21/09 08:57 |
| Intern? [edited] | Andy Neil | 06/24/09 03:00 |
| HyperTerminal and microcontroller - please help! | Giang Ho | 06/23/09 10:36 |
| HyperTerminal and microcontroller - please help! | Giang Ho | 06/23/09 19:07 |
| May be I need to use cross over serial cable | Andy Neil | 06/24/09 03:03 |
| Use printf to output to UART, but receive incorrect data | Giang Ho | 06/24/09 10:09 |
| Re: Use printf to output to UART, but receive incorrect dat | Giang Ho | 06/24/09 10:13 |
| printf only can output value from 256 to 32767 correctly | Giang Ho | 06/25/09 07:42 |
| Hasn't Maarten already explained this? | Andy Neil | 06/25/09 07:54 |
| Re: Hasn't Maarten already explained this? | Giang Ho | 06/25/09 08:31 |
| Show it! | Andy Neil | 06/25/09 09:08 |
| Re: Show it | Giang Ho | 06/25/09 19:48 |
| use a cast | Maarten Brock | 06/24/09 16:11 |
| or RTFM | Andy Neil | 06/24/09 17:06 |
| Re: RTFM | Giang Ho | 06/25/09 19:55 |
| I found the solution. Thanks | Giang Ho | 06/26/09 08:46 |
Direct Memory?  | Andy Neil | 06/26/09 09:03 |
| Re: Direct memory | Giang Ho | 06/26/09 09:21 |
| Definitely a BAD Idea! | Andy Neil | 06/26/09 09:43 |
| Re:Definitely a BAD Idea! | Giang Ho | 06/26/09 10:01 |
| Could you please suggest? | Andy Neil | 06/26/09 10:25 |
| Re: Do not call from ISR | Giang Ho | 06/26/09 18:19 |
| I didn't say that | Andy Neil | 06/27/09 03:02 |
Thanks! | Giang Ho | 06/27/09 09:10 |
| Re: use a cast | Giang Ho | 06/24/09 19:47 |