| Sivanand Somasundaram 07/08/09 05:25 Read: 105 times Singapore Singapore |
#166856 - trouble again Responding to: Per Westermark's previous message |
I did connect to my main circuit in whcih the ouputs of microcontroller go to a multiplexer and then to a buffer and a particular relay is actuated.
BUt now the microcontroller is till working and still giving correct output and the demultiplexing output is also correct as per the datasheet. BUt the buffer inputs and ouputs I am not sure of if it is correct and so the relays dont actuated. I will upload in my further post of my schematic layout and links to datasheets |
| Topic | Author | Date |
| debugging AT89S52 | Sivanand Somasundaram | 06/24/09 09:52 |
| where? | Erik Malund | 06/24/09 15:08 |
| FAQs | Jan Waclawek | 06/24/09 15:19 |
| Image uploaded and other corrections made | Sivanand Somasundaram | 06/24/09 22:27 |
| You MUST use a max232 or equivalent | David Prentice | 06/25/09 01:19 |
| MAx232 connections | Sivanand Somasundaram | 06/25/09 05:37 |
| if you have connected the PC RS232 directly | Erik Malund | 06/25/09 06:15 |
| ambiguous? | Andy Neil | 06/25/09 07:02 |
| Not necessarily! | Richard Erlacher | 06/27/09 17:32 |
| Image of MAx232 connection for reference | Sivanand Somasundaram | 06/25/09 05:40 |
| 89S52 - PC -> MAX232 conenctions | Shoaib Ali | 06/25/09 06:49 |
| max 232 connection | Sivanand Somasundaram | 06/30/09 06:10 |
| To test MAX232 | Shoaib Ali | 06/30/09 17:21 |
| Testing a Com port using hyperterminal | Sivanand Somasundaram | 07/01/09 01:44 |
| PC Loop-back | Andy Neil | 07/01/09 02:13 |
| Connections of COm port | Sivanand Somasundaram | 07/01/09 04:16 |
| So what about direct on the COM port | Andy Neil | 07/01/09 08:11 |
| Check the PC's driver | Hal Albach | 07/01/09 10:21 |
| Testing an RS232 driver | Andy Neil | 07/01/09 13:13 |
| results of rs232 testing | Sivanand Somasundaram | 07/02/09 02:17 |
| Hyperterminal | Sivanand Somasundaram | 07/02/09 05:43 |
| data not displayed in echo mode in hyperterminal | Andy Neil | 07/02/09 06:08 |
| Why do you call it hypoterminal? | Richard Erlacher | 07/06/09 08:29 |
| I got confused regarding the value of capacitors | Andy Neil | 06/30/09 18:48 |
| MAx driver and hypertermianl problem solved but... | Sivanand Somasundaram | 07/03/09 04:55 |
| can somebosy please reply? | Sivanand Somasundaram | 07/05/09 05:52 |
| Try a step by step aproach | KONSTANTINOS L. ANGELIS | 07/05/09 14:53 |
| Reg Step by step approach | Sivanand Somasundaram | 07/05/09 23:08 |
| How are you programming the flash memory of AT89S52 | KONSTANTINOS L. ANGELIS | 07/06/09 02:51 |
| clarifications | Sivanand Somasundaram | 07/06/09 03:31 |
| Not to UART | Per Westermark | 07/06/09 03:51 |
| Additional info about the board AT89S52 and ISP | KONSTANTINOS L. ANGELIS | 07/06/09 11:49 |
| Many issues solved but one | Sivanand Somasundaram | 07/07/09 00:58 |
| How? | Per Westermark | 07/07/09 02:26 |
| diode...connection | Sivanand Somasundaram | 07/07/09 02:56 |
| Explain with graph or text | Per Westermark | 07/07/09 03:02 |
| clarification | Sivanand Somasundaram | 07/07/09 03:25 |
| Study the AT89S52 datasheets | KONSTANTINOS L. ANGELIS | 07/07/09 03:59 |
| Please read the answers you get | Per Westermark | 07/07/09 04:04 |
| It works now!!!! | Sivanand Somasundaram | 07/07/09 04:20 |
| What series resistor? | Per Westermark | 07/07/09 04:50 |
| Connection of diode | Sivanand Somasundaram | 07/07/09 05:33 |
| Please clarify | Per Westermark | 07/07/09 05:46 |
| the problem is NOT the 2.7V | Erik Malund | 07/07/09 06:27 |
| clarifications | Sivanand Somasundaram | 07/07/09 09:11 |
Google Ohms law  | Per Westermark | 07/07/09 09:55 |
| Report | Sivanand Somasundaram | 07/07/09 22:00 |
| Measure pin voltage when held low, not hgh | Per Westermark | 07/08/09 02:12 |
| trouble again | Sivanand Somasundaram | 07/08/09 05:25 |
| details... | Sivanand Somasundaram | 07/08/09 05:34 |
| Troll? | Per Westermark | 07/08/09 06:19 |
| clarification | Sivanand Somasundaram | 07/08/09 07:37 |
| I am not an electrical engineer I am a mechanical engineer | Andy Neil | 07/08/09 09:14 |
| Do not accept everything as is, Revise your schematic | KONSTANTINOS L. ANGELIS | 07/08/09 06:39 |
| who cares? | Erik Malund | 07/08/09 07:40 |
| Short-circuit | Per Westermark | 07/08/09 07:54 |
| OOPS, anyhow | Erik Malund | 07/08/09 08:16 |
| circuit revised but .... | Sivanand Somasundaram | 07/12/09 22:27 |
| have changed to new buffers .. | Sivanand Somasundaram | 07/12/09 23:49 |
| Post the revised schematic to check | KONSTANTINOS L. ANGELIS | 07/13/09 02:22 |
| schematic | Sivanand Somasundaram | 07/13/09 03:09 |
| there are "LED resistors" whwre are the LEDs and | Erik Malund | 07/13/09 06:28 |
| you are in deep waters | Andy Neil | 07/13/09 08:01 |
| what's the error? | Sivanand Somasundaram | 07/13/09 09:20 |
| It is hopeless, but anyhow | Erik Malund | 07/13/09 09:38 |
| Vf for diode | Sivanand Somasundaram | 07/13/09 10:32 |
| Too deep waters indeed, describe everything | KONSTANTINOS L. ANGELIS | 07/13/09 10:54 |
| then how do you propose they will both work when in patralle | Erik Malund | 07/13/09 16:50 |
| Haven't you seen that he has series resistors with each LED? | Kai Klaas | 07/13/09 19:08 |
| update | Sivanand Somasundaram | 07/13/09 21:25 |
| Resistor value | Sivanand Somasundaram | 07/13/09 23:10 |
| update.-2 | Sivanand Somasundaram | 07/14/09 04:22 |
| free-wheel diode | Per Westermark | 07/14/09 04:25 |
| details of relay | Sivanand Somasundaram | 07/14/09 04:33 |
| details of relay-2 | Sivanand Somasundaram | 07/14/09 04:37 |
| free-wheel diode always reversed | Per Westermark | 07/14/09 05:41 |
| No simple diode but a zener in series! | Kai Klaas | 07/14/09 08:32 |
| zener and IN4148 already in series? | Sivanand Somasundaram | 07/14/09 09:52 |
| clarification | Sivanand Somasundaram | 07/14/09 09:58 |
| The datasheet is a bit confusing... | Kai Klaas | 07/14/09 10:02 |
| no space to connect | Sivanand Somasundaram | 07/14/09 10:12 |
| Solder it on the solder side! | Kai Klaas | 07/14/09 10:26 |
| Thanks..but | Sivanand Somasundaram | 07/14/09 21:49 |
| Did you made a PCB ? | KONSTANTINOS L. ANGELIS | 07/14/09 15:05 |
| YEs true | Sivanand Somasundaram | 07/14/09 21:28 |
| Regarding zener and In4148 | Sivanand Somasundaram | 07/14/09 22:18 |
| update on relay testing | Sivanand Somasundaram | 07/15/09 01:12 |
| testing relay using multimeter | Sivanand Somasundaram | 07/15/09 01:25 |
| NO, NO, NO | Erik Malund | 07/15/09 06:56 |
| as opposed to | Erik Malund | 07/15/09 06:47 |
| what about the coil across the LEDs? | Erik Malund | 07/14/09 05:03 |
| full picture of relay | Sivanand Somasundaram | 07/14/09 05:11 |
| use preview | Erik Malund | 07/14/09 05:24 |
| true | Sivanand Somasundaram | 07/14/09 07:52 |
| Heaven, Erik, ... | Kai Klaas | 07/14/09 08:41 |
| it works but for relay orientation | Sivanand Somasundaram | 07/14/09 09:02 |
| Look at this, too | Kai Klaas | 07/14/09 09:03 |
| latest posts | Sivanand Somasundaram | 07/15/09 01:29 |
| Don't be so quick to experiment | Per Westermark | 07/15/09 03:11 |
| clarifications | Sivanand Somasundaram | 07/15/09 04:02 |
| make simple tests like this | KONSTANTINOS L. ANGELIS | 07/15/09 04:44 |
| reg the test circuit.. | Sivanand Somasundaram | 07/15/09 04:58 |
| circuit details | Sivanand Somasundaram | 07/15/09 05:20 |
| Still experimenting | Per Westermark | 07/15/09 05:30 |
| Already covered in this thread - more than once | Per Westermark | 07/15/09 05:21 |
| but how did the above circuit work? | Sivanand Somasundaram | 07/15/09 05:27 |
| Experiments can work, even if incorrect | Per Westermark | 07/15/09 05:48 |
| there is no zener diode | Sivanand Somasundaram | 07/15/09 07:21 |
| Don't ignore the datasheet. | Per Westermark | 07/15/09 07:42 |
| thanks | Sivanand Somasundaram | 07/15/09 09:02 |
| Forget the sales engineer! | Kai Klaas | 07/15/09 08:01 |
| Minimum turn-on voltage | Kai Klaas | 07/15/09 08:38 |
| it HAPPENS to | Erik Malund | 07/15/09 07:11 |
| ther is no other way now | Sivanand Somasundaram | 07/15/09 07:17 |
| where there is a will, there is a way | Erik Malund | 07/15/09 08:31 |
| is this what you are suggesting? | Sivanand Somasundaram | 07/15/09 09:25 |
| Relay | Steve M. Taylor | 07/15/09 15:35 |
| Finally reached the shore | Sivanand Somasundaram | 07/16/09 05:15 |
| Project completed ? | KONSTANTINOS L. ANGELIS | 07/16/09 05:23 |
| yes completed | Sivanand Somasundaram | 07/16/09 06:51 |
| Good luck! | Kai Klaas | 07/16/09 07:38 |
| Reagrding other relays | Sivanand Somasundaram | 07/16/09 21:03 |
| Scan through catalogs | Per Westermark | 07/17/09 01:05 |
| you do not need to buy there, but | Erik Malund | 07/17/09 06:44 |
| form factor | Sivanand Somasundaram | 07/20/09 03:45 |
| The datasheets normally have the answer | Per Westermark | 07/20/09 03:56 |
| files | Sivanand Somasundaram | 07/20/09 04:23 |
| Not so many files | Per Westermark | 07/20/09 05:37 |
| Regarding LEd | Sivanand Somasundaram | 07/23/09 08:13 |
| _always_ current-limited supply! | Per Westermark | 07/23/09 08:50 |
| Only if it contains a current limiting resistor! | Kai Klaas | 07/23/09 08:50 |
| thanks and file updates | Sivanand Somasundaram | 07/23/09 21:23 |
| You can enormously save user space... | Kai Klaas | 07/24/09 08:30 |
| Hard now | Per Westermark | 07/24/09 08:36 |
Correct! | Kai Klaas | 07/24/09 09:12 |
| never do that | Erik Malund | 07/15/09 07:07 |
| Kai, you must be able to see invisible ink | Erik Malund | 07/15/09 07:03 |